Moulures - Tasseaux
Catégorie
- PIN DES LANDES SANS NŒUD (66)
- Sapin du Nord raboté (29)
- MDF (14)
- Bois brut sapin du nord (9)
- Samba (9)
- Pin des Landes brut (7)
- Chêne (5)
- Bois revêtu blanc (4)
- Moulures (4)
- Accessoires de pose pour lambris (2)
Marque
- GASCOGNE WOOD PRODUCTS (87)
- SOTRINBOIS (56)
- NMC FRANCE SAS (4)
- NORDLINGER (2)
Dimension
- 24 x 64 mm (1)
Finition / Aspect
- Pin Maritime massif (37)
- Pin Maritime massif / Raboté (26)
- Samba massif (9)
- Pin Maritime massif / Brut (6)
- Chêne massif (5)
- MDF Revêtu papier Blanc (4)
- Prépeint (4)
- Pin sans noeuds (2)
- alu (2)
Largeur (mm)
Lieu de fabrication
- France (1)
Longueur
- 2 ml (4)
Matière
- Polystyrène (3)
- MDF (1)
- Polyuréthane (1)
Section appelée
- 10 x 40 MM (4)
- 24 x 24 MM (4)
- 6 x 30 MM (4)
- 18 x 40 MM (3)
- 23 x 23 MM (3)
- Ø 15 MM (3)
- 10 x 30 MM (2)
- 10 x 50 MM (2)
- 10 x 60 MM (2)
- 14 x 30 MM (2)
Section réelle
- 22 x 22 MM (7)
- 9 x 38 MM (5)
- 27 x 27 MM (4)
- 5 x 27 MM (4)
- 13 x 27 MM (2)
- 13 x 38 MM (2)
- 17 x 17 MM (2)
- 17 x 58 MM (2)
- 19 x 19 MM (2)
- 25 x 25 MM (2)
Type
- 2 angles arrondis (8)
- 1 angle arrondi (1)
- A feuillure 3 x 20 mm (1)
- Pour carrelage (1)
Utilisation
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}
- {{ attr.label }}: {{ attr.value.length > 20 ? attr.value.slice(0, 20) : attr.value }}